140 TILES 46 Edges 4 Corners VENTED Interlocking Garage Floor Tiles 400mm

• 18mm PVC Garage Tiles
• 40 x 40cm Square Size
• Ribbed Textured Surface
• Vented Interlocking Tile Design
• 140-Piece Garage Flooring Set with 46 Edges and 4 Corners for Modular Floor Coverage

Vented PVC Tiles for Garage Flooring

These 18mm PVC garage floor tiles provide a modular flooring solution for garages and other suitable areas where an interlocking surface is preferred. Each square tile measures 40 x 40cm and features a ribbed surface pattern with a textured finish.

The vented construction is combined with a range of listed features including moisture resistance, waterproof construction, chemical resistance, stain resistance, non-slip properties and hard-wearing performance. These characteristics make the tiles suitable for buyers looking for a purpose-focused surface for demanding garage and utility areas.

The black matt finish gives the flooring a clean, understated appearance, while the modular format allows the installation to be planned around the dimensions and layout of the available space.

40 x 40cm Ribbed Tiles for Modular Coverage

Each tile measures 40 x 40cm, creating a manageable square section that can be connected to adjoining tiles. The set contains 140 tiles, providing a substantial number of individual sections for planning a larger flooring installation.

The ribbed surface pattern gives the tiles a defined textured appearance. Before installation, measure the usable floor area and consider walls, entrances, storage, work areas and other fixed features that may affect the final layout.

Because the flooring is assembled from individual sections, the arrangement can be planned progressively across the available area rather than relying on one continuous sheet.

Vented Interlocking Design for Practical Installation

The tiles use an interlocking installation system and are specified as vented. The modular construction allows individual 40 x 40cm sections to be connected together to form a larger floor surface.

The set also includes 46 edge pieces and 4 corner pieces. These additional components can be used when planning the boundaries and corners of the completed flooring layout, helping the installation accommodate the perimeter of the designated area.

18mm PVC Construction for Demanding Areas

The tiles are manufactured from PVC and have a specified thickness of 18mm. This provides a substantial tile profile while retaining the modular 40 x 40cm format.

The listed features include chemical resistance, moisture resistance, stain resistance, waterproof construction and hard-wearing performance. Non-slip properties are also specified, alongside the vented design.

These characteristics are particularly relevant when considering flooring for garages, parking pads, workshops and other utility areas where the surface may encounter moisture, dirt or everyday wear. Actual performance will depend on the installation conditions and how the flooring is used.

140 Tiles with Edges and Corner Pieces

The complete set includes 140 tiles, together with 46 edge pieces and 4 corner pieces. This combination gives buyers individual flooring sections as well as components intended for the outer boundaries and corners of the installation.

The 40 x 40cm tile format makes it possible to plan the flooring section by section. Measuring the installation area first will help establish how the available pieces can be arranged and where edge and corner components will be needed.

When planning the layout, consider the shape of the room or garage rather than simply covering the largest possible rectangular area. Fixed structures, entrances and working areas can all influence the most practical arrangement.

Non-Slip Textured Surface and Vented Construction

The floor surface has a ribbed pattern and textured finish, while the product is specified as non-slip. The matt black finish provides a practical appearance for garage and utility environments.

The tiles are also listed as moisture resistant and waterproof, with a vented design. These properties may be relevant in areas where moisture and general garage conditions need to be considered when selecting flooring.

For maintenance, remove loose dirt and debris regularly and clean the surface using a method suitable for PVC flooring. The modular construction also allows individual sections to be checked or replaced more easily than a single continuous floor covering where required.

Flexible Use Across Garage and Utility Spaces

The tiles are specified for a range of areas including basements, concrete floors, garages, offices, parking pads and shops. This gives the product flexibility beyond a standard garage-only installation, although the final suitability should always be assessed against the specific environment and intended use.

At approximately 0.61kg per tile, each individual section is relatively lightweight to handle. This can make positioning and rearranging the modular flooring more manageable during installation or maintenance.

The combination of 18mm PVC construction, interlocking installation, vented design and separate edge and corner components makes this format suitable for buyers planning a structured modular floor rather than a basic loose-laid mat.

Product Specifications

• Condition: New
• Product Type: Garage Floor Tile
• Thickness: 18mm
• Tile Size: 40 x 40cm
• Colour: Black
• Surface Pattern: Ribbed Surface Pattern
• Floor Surface Texture: Textured
• Finish: Matt
• Installation: Interlocking
• Suitable For: Basement, Concrete, Garage Floor, Office, Parking Pad and Shop
• Style: Modern
• Room: Garage
• Item Weight: 0.61kg

Frequently Asked Questions

What size are these garage floor tiles?

Each tile measures 40 x 40cm and has a square shape. This modular size allows the individual sections to be connected together to create a larger garage or utility-area floor.

How thick are the tiles?

The tiles are 18mm thick. This provides the specified substantial PVC tile profile while maintaining the manageable 40 x 40cm modular format.

How many tiles are included?

The set contains 140 individual tiles. It also includes 46 edge pieces and 4 corner pieces for completing the boundaries and corners of the flooring layout.

Are the tiles vented?

Yes. The product is specifically listed as vented. The vented construction forms part of the overall tile design and should be considered when selecting the flooring for the intended installation area.

What surfaces can these tiles be installed over?

The supplied installation information lists concrete, on-grade or concrete subfloors, plywood and tile as suitable installation locations. The supporting surface should be suitably prepared before fitting.

Do these tiles require underlayment?

No. The supplied specifications state that underlayment is not required. The tiles can be installed using their specified interlocking system over the listed supporting surfaces.

How long should the tiles acclimate before installation?

The minimum acclimation period is listed as one day. This should be allowed for when planning the installation so the tiles have the specified acclimation time before fitting.

What features do these PVC garage tiles have?

The listed features include chemical resistance, easy replaceability, hard-wearing construction, moisture resistance, non-slip properties, stain resistance, vented construction and waterproof characteristics.

Are edge and corner pieces included?

Yes. The set includes 46 edge pieces and 4 corner pieces in addition to the 140 main tiles. These components are intended to form part of the perimeter and corner layout.

Where can these interlocking tiles be used?

The supplied suitability information includes basements, concrete areas, garage floors, offices, parking pads and shops. The appropriate application will depend on the specific environment, supporting surface and intended level of use.